https://www.high-endrolex.com/10

V Међународна конференција ''Безбједност саобраћаја у локалној заједници'' - confOrganiser.com

V Међународна конференција ''Безбједност саобраћаја у локалној заједници''

27 - 28.10.2016.

POSSIBILITY TO USE RHEOCASTING PROCESS FOR MANUFACTURING PARTS IN AUTOMOTIVE INDUSTRY

Аутори:
1. Milena Ćosić, Tehnikum Taurunum, College of Mechanical Engineering, Serbia
2. Mirjana Stojanovic, Serbia


Апстракт:
In this work, the results of research concerning application of rheocasting process for piston alloys structure and properties improvement have been shown. The procedure of stirring the melt by a plate stirrer at different speeds (rpm): 500, 1000 and 1500 was used. The influence of mechanical stirring effect on morphology and distribution of primary phases (- Al i Si) was tested in the hypereutectic Al-18wt%Si alloy. Test results showed a positive influence of melt stirring speed on the structural change of the tested alloy in comparison with the structure of samples obtained by a conventional casting procedure. The effects of a structural change are optimised at the melt stirring speed of 500 rpm.

Тематска област:
Производне технологије и инжењерство

Уводни рад:
Да

Датум пријаве сажетка:
05.04.2011.

Бр. отварања:
712

Конференцијa:
11th International Conference on Accomplishments in Mechanical and Industrial Engineering

Пријављени рад од аутора

Copyright © 2021 confOrganiser.com. All rights reserved. | BitLab

https://www.high-endrolex.com/10